lmorchard - Pebbling Club 🐧🪨

Pibow Belt Base for Raspberry Pi by pburgess « adafruit industries blog

www.adafruit.com
2013-05-30T15:54:22.000Z
to:fb adafruit raspberrypi wearables pibow imported:pinboard

Notes

REQUIRES PIBOW CASE – this is ONLY a replacement bottom layer. Laser cut from 3mm (1/8″) acrylic. The belt is made from 1.5″ nylon webbing (better-equipped hardware, sewing or camping stores will stock this and related fittings), but it’s also perfectly suited to most camera straps if you have a DSLR + Raspberry Pi project in mind. The USB battery pack is an item from the Adafruit shop, held in place with cable ties.

Feed

Unfurl

{ "author": "Matt", "date": "2013-04-16T16:53:07.000Z", "description": "On Thingiverse: Pibow Belt Base for Raspberry Pi by pburgess: Alternate ‘Layer 0’ for Pibow case simplifies wearable Raspberry Pi projects. Instructions REQUIRES PIBOW CASE – this…", "image": "https://cdn-blog.adafruit.com/uploads/2013/03/PiBowBelt.png", "logo": "https://cdn-blog.adafruit.com/uploads/2020/04/logo_small@2x.png", "publisher": "Adafruit Industries - Makers, hackers, artists, designers and engineers!", "title": "Pibow Belt Base for Raspberry Pi by pburgess", "url": "https://blog.adafruit.com/2013/03/08/pibow-belt-base-for-raspberry-pi-by-pburgess/", "feed": "https://blog.adafruit.com/feed/", "lang": "en", "failed": true, "failedAt": 1728194790772, "failedError": "TimeoutError: Promise timed out after 10000 milliseconds" }

0 - 50 of 1 items

10 25 50 100 250